The effect of platform switching on stress distribution in implants and periimplant bone studied by nonlinear finite element analysis.

STATEMENT OF PROBLEM: It is unknown whether dental implant systems with a platform-switched configuration have better periimplant bone stress distribution and lead to less periimplant bone level changes. PURPOSE: The purpose of this study was to quantitatively investigate interfacial stress and stress distribution in implant bone in 2 implant abutment designs (platform-switched design and conventional diameter matching) by using a nonlinear finite element analysis method. MATERIAL AND METHODS: A finite element simulation study was applied to 2 commercially available dental implant systems: the Ankylos implant system with a reduced-diameter abutment (platform-switched implant) and the Anthogyr implant system with an abutment of the same diameter (regular platform implant). These 2 dental implant systems were positioned in a bone block, which was constructed based on a cross-sectional image of a human mandible in the molar region. In simulation, a single vertical load of 50 N, 100 N, or 150 N and horizontal loads of 50 N and 100 N were applied to the occlusal surface of the abutment. RESULTS: The finite element analysis found that the Ankylos implant system has a higher maximum von Mises stress in the implant abutment connection section and a lower maximum von Mises stress in the periimplant bone. The opposite results were found in the Anthogyr implant system. CONCLUSIONS: Lower stress levels in the periimplant bone with a more uniform stress distribution were found for the Ankylos implant system with a platform-switched configuration. Although relatively higher stress was found in the abutment, premature implant failure is not anticipated because of the high strength of titanium alloy.