Measurement of forces and moments around the maxillary arch for treatment of a simulated lingual incisor and high canine malocclusion using straight and mushroom archwires in fixed lingual appliances.

INTRODUCTION: An Orthodontic SIMulator (OSIM) was used to investigate the propagation of forces and moments around a simulated archform for a gingival displaced canine and lingual displaced lateral incisor using fixed lingual orthodontic appliances. METHODS: In-Ovation L self-ligating lingual brackets were bonded to anatomically shaped teeth on the OSIM, and the teeth were positioned such that a G4 NiTi 0.016" large maxillary mushroom archwire could be ligated in passive position. Each trial consisted of two movements: a 3mm lingual displacement of the 1-2 lateral incisor at 0.2 mm increments, and a 1.5 mm gingival displacement of the 2-3 canine at 0.15 mm increments (n = 50). Anterior brackets were repositioned to accommodate G4 NiTi 0.016" universal straight archwires (n = 50). Tests were completed at 37 degrees C, and force and moment data in all directions was collected for each tooth around the arch at all increments. RESULTS: In general, the straight archwire produced significantly larger forces and moments at the centre of resistance for teeth of interest than did mushroom archwires. Specifically, the straight archwire produced 2.62 N and 3.81 N more force in the direction of tooth movement on the tooth being moved for a gingival displaced canine and lingual displaced lateral incisor, respectively, as compared to mushroom archwires. CONCLUSIONS: Results from this study suggest that mushroom archwires may provide better mechanics for movement of teeth in the anterior segment when using a round archwire; however, only biomechanical data was considered in this study and there are many factors that need to be considered in treatment planning.