[Application of plasma sprayed zirconia coating in dental implant: study in implant].

Objective: To investigate the osseointegration of a novel coating-plasma-sprayed zirconia in dental implant. Methods: Zirconia coating on non-thread titanium implant was prepared using plasma spraying, the implant surface morphology, surface roughness and wettability were measured. In vivo, zirconia coated implants were inserted in rabbit tibia and animals were respectively sacrificed at 2, 4, 8 and 12 weeks after implantation. The bond strength between implant and bone was measured by push-out test. The osseointegration was observed by scanning electron microscopy (SEM), micro CT and histological analyses. Quantified parameters including removal torque, and bone-implant contact (BIC) percentage were calculated. Results: The surface roughness (1.6 microm) and wettability (54.6 degrees ) of zirconia coated implant was more suitable than those of titanium implant (0.6 microm and 74.4 degrees ) for osseointegration. At 12 weeks, the push-out value of zirconia coated implant and titanium implant were (64.9+/-3.0) and (50.4+/-2.9) N, and BIC value of these two groups were (54.7+/-3.6)% and (41.5+/-3.6)%. All these differences had statistical significance. Conclusions: The surface characters of zirconia coated implant were more suitable for osseointegration and present better osseointegration than smooth titanium implant in vivo, especially at early stage.