[Effect of sandblasting on the microroughness of ceramic restorations].

The influence of aero-abrasive technology on the microroughness of the ceramic samples standardized in shape, structure, and manufacturing method was studied by comparing the results obtained from the action of alumina particles of 27 and 50 mum size under a pressure of 0.5 and 2 atm for 5 seconds at a distance of 3 cm. To objectify the features of the treated surface relief its micro-roughness has been studied. With the help of a scanning electron microscope the morphology of studied samples was visualized. The data confirming the reliable absence of differences in the microroughness between the sandblasting methods under the given conditions was obtained. Microphotographs of samples surface obtained using the mode of reflected electrons detection showed no significant structural differences between all groups of samples. Thus, sandblasting can be integrated into the general algorithm as a stage of ceramics preparation for adhesive fixation since it does not cause mechanical damage to the surface, does not fundamentally change its structure and cleans the surface from contamination.