Comparison of the Self-Adjusting File and Hedstrom File Used as Supplementary Instruments for the Remaining Filling Material Removal During Retreatment of C-Shaped Canals: A Micro-CT Study.

OBJECTIVE: The aim of this study was to evaluate the use of Self-adjusting file (SAF) system and Hedstrom (H) file for removing remaining filling material (RFM) from C-shaped canals. METHODS: 20 C-shaped mandibular second molars with C1 configurations were instrumented, filled with tagger s hybrid technique. Samples were divided into 2 groups (n=10). Reciproc R25 and a Mtwo 35/04 file were used for retreatment in both groups. Then, a 2.0 SAF file (group I) and a #35 H file (group II) were used as supplementary steps for RFM removal. Micro-CT scanning was performed after every procedure. Total volumes were calculated and converted into percentages. Also, the minimum wall thickness at 3, 5, 7 mm from apex was calculated. The Prism 7.0 software was used as the analytical tool with a significance of 5%. RESULTS: Initial obturation removal was approximately 64% in group I and 67% in Group II. The apical third had the highest values of RFM. The use of a H file significantly reduced the RFM compared to SAF in the total canal length respectively (30% vs 18%) and at 1-3 mm and 3-6 mm when compared to the use of SAF. A statistically significant decrease of RFM and minimum wall thickness were observed in both groups (P<0.05). CONCLUSION: None of the retreatment techniques completely removed RFM. The apical region was the more unaffected area. Also, the SAF file was less effective than the H file in removing the RFM. Although C-shaped canals possesses thinner dentinal wall thickness, no excessive dentine removal was observed after each instrument use.