Evaluation of the color stability of temporary materials produced with CAD/CAM.

BACKGROUND: If a temporary restoration is in the esthetic area and needs to be worn for a long time, the color stability of temporary materials becomes an important factor. OBJECTIVES: The aim of this in vitro study was to evaluate the long-term effects of various staining solutions on the color stability of different temporary materials produced with the computer-aided design and computer-aided manufacturing (CAD/CAM) technology. MATERIAL AND METHODS: In the study, the following materials were used: VITA CAD-Temp(R) (group 1); Ceramill(R) Temp (group 2); and Telio(R) CAD (group 3). Forty disk-shaped specimens (10 mm in diameter, 2 mm in thickness) of each material (N = 120) were produced with a CAD/CAM system. Staining solutions - of tea (A), of coffee (B) and cola (C) - and distilled water (D, control) were used, and color was evaluated before and after storing the samples in the solutions. Measurements were taken with a spectrophotometer and the color parameters (L*, a*, b*, and DeltaE) were calculated according to the Commission internationale de l'eclairage system (CIELab). The results were evaluated with the two-way analysis of variance (ANOVA) and Tukey's tests (alpha = 0.05). RESULTS: Clinically perceivable (DeltaE00 > 0.8) and statistically significant (p < 0.001) color differences were detected in all specimens. The highest DeltaE00 value was found in the Ceramill Temp specimens. In addition, the highest DeltaE00 values were noted for the specimens stored in cola and the coffee solution for all groups. The lowest DeltaE00 value was observed for the groups stored in the tea solution. CONCLUSIONS: Clinically perceivable color changes were observed in all the specimens kept in the solutions. Color changes were greater for cola and coffee as compared to tea.